What You’ll Require

Naturally, you’ve got to cover the preliminary steps prior to you can go about successfully installing a brand-new shower head. Don’t avoid the prep. phase. To correctly change an existing shower head or install a brand-new fixture (such as high-efficiency, WaterSense-labeled shower head), ensure you have a set of slip-joint pliers, adjustable wrenches and thread seal/PTFE tape on deck.

Prior to removing your old shower head parts, think about putting a cushion or layer of towels down to safeguard your tile or tub if tools are dropped. In addition, obstruct your shower’s drain with a fabric or cover, so no bolts or parts can fall through. With your shower safeguarded from unexpected damage or part loss, make last preparations by shutting off the supply of water to your shower.

Now that you’ve got the tools for the job all set and have completely prepared, you can get to in fact changing your old shower head and installing a brand-new one.

Step 1: Removing an Old Shower Head

If you’re removing an existing shower head, the first thing you must do is attempt to eliminate the shower head by hand. Rotate the shower head counter-clockwise and see if it disconnects from the shower arm; if this does not work, highlight your set of pliers and an adjustable wrench.

Wrap a fabric around your shower arm or tape around the pliers, and hold the shower arm with in place with the pliers. The tape/cloth serve to protect your arm finish, so do not avoid this step! Now, utilize your adjustable wrench to loosen the shower head by force, in the same counter-clockwise motion you tried by hand.

 Step-by-Step Guide to Installing a Shower Head

Step-by-Step Guide to Installing a Shower Head

Step 2: Create a Water Seal with PTFE Tape

With the existing shower head got rid of, wrap the shower arm threads with a number of layers of PTFE tape and securely push the tape into the threading. This tape acts as a water-tight seal in between your shower arm and brand-new shower head, and must be changed whenever you observe a leakage during regular usage.

Step 3: Installing a New Shower Head: Fixed-Mount Model

If you’re equipping your shower with a brand-new fixed-mount shower head, congratulations! You’ve chosen the most convenient shower head type to set up – this step is essentially a reverse of Step 1. Just screw the brand-new shower head onto the shower arm with an adjustable wrench, and tighten by hand to develop the best seal.

Reconnect your water supply and turn on the shower to test for leaks around the seal. If you find any leak, applying additional PTFE tape can deal with the issue rapidly.

Step 4: Installing a New Shower Head: Handheld Model

Installing portable shower heads needs an added step or more than installing equivalent fixed-mount designs; however, it’s still an easy procedure and you must have no problem installing the brand-new device by yourself.

Start by screwing the shower head mount onto your shower arm, just as you would a fixed-mount shower head. Hand tighten the mount to make sure the very best seal possible. Link one end of the shower hose packaged with the unit to the install, and the other end to the handheld shower head. Now, you can switch on your water supply and test your new shower head for leaks. If you catch any small leaks, utilize more PTFE tape to seal the threads in between the mount and your shower arm.

Step 5: Installing a New Shower Head: Combination Model

Combination shower head models, which have a fixed-mount base and different portable shower head, are actually much easier to set up than you may think.

First, attach the diverter system, which diverts water to either the fixed-mount shower head or the portable unit, to your shower arm, and tighten it in place. Then, install the fixed-mount shower head onto the end of the diverter with an adjustable wrench and tighten by hand, developing the greatest seal.

Follow manufacturer’s guidelines to install the handheld shower head, as some models may need more steps than others. Next, connect the shower hose to the handheld shower head and the diverter, and turn on the supply of water, Now, you can check your combination shower head for leakages, and use additional PTFE tape as essential to produce a water-tight seal.

That’s it! Installing a shower head is one of the most convenient DIY plumbing tasks a property owner can do to improve the quality of their plumbing, and even lower total water usage if WaterSense designs are utilized.



If you need a Fort Myers Plumber to assist you with your plumbing projects, please call us today at (239) 260-4446, and we’d be happy to provide you with a free quote.

No Comments

Be the first to start a conversation

Leave a Reply

  • (will not be published)