How To: Fix a Running Toilet

Replacing the Flapper
A malfunctioning flapper is generally behind a running toilet problem. When you flush, the flapper is the rubber stopper within the tank that lifts to release water into the bowl. In time, the flapper deteriorates, permitting water to flow past its once-tight seal. Push down on the flapper to test its integrity; if the toilet right away stops running, then you’ve recognized the issue. The next step is to replace the flapper.

Start by turning the water off to the toilet (the shutoff valve must be straight beneath the tank). Flush the toilet to drain all staying water from the tank and bowl. Now you can eliminate the flapper. As you do so, keep in mind the way in which it connects to all-time low of the tank. There are numerous kinds of flappers, so when you see the hardware shop to purchase a replacement, make certain you choose one that equals.

Follow the setup guidelines that come with your replacement flapper. Crucial is including or getting rid of links to establish an appropriate length for the chain connecting the flapper to the flush arm. Leave the chain too long and you’ll get “agitating handle syndrome.” (You know, when you need to fidget with the manage a bit prior to the tank starts to refill.) If you make the chain too short, the flapper will not have the ability to rise totally away from the drain hole, leading to abbreviated flushes.

Check the Fill Tube
Let’s state that when detecting the problem with your toilet, pressing down on the flapper did not stop the water from running. In your case, the cause may be the fill tube. That’s the little plastic tube going from the fill valve– the main assembly in the tank– to the overflow pipeline, which drains excess water when the tank fills too high. If you see that the fill tube is under water, cut it back so that the tube clears the water level.

How To: Fix a Running Toilet

How To: Fix a Running Toilet

Examine Your Float
There are two fundamental kinds of toilet floats: the ball float and the cup float (the previous is more common with older toilets). Having the ball float set expensive forces the water level to rise above the overflow pipeline, and as an outcome, the tank never ever stops draining. Taking care of a ball float is as easy flexing its arm. To take care of a cup float, find the means by which it changes (commonly a pinching system), then move the float down the main tube that it sits around.

Replace the Fill Valve
If the neither the flapper nor the fill tube nor the ball float is at fault, then it’s probably time to change your toilet’s fill valve. To achieve this, very first drain the tank (information above), then totally free the valve from its position by unscrewing the water supply line and lock nut from outside the tank. Making certain you buy the best replacement, take the old valve with you when you go shopping. Once you’re back at home, secure the new valve, change the float to the wanted water level, and you ought to be great to go!

If you find yourself in need of a plumber in Fort Myers, then please call us at (239) 260-4446 today so we can provide you with a free, no-obligation quotation

No Comments

Be the first to start a conversation

Leave a Reply

  • (will not be published)