For homeowners throughout the United States, dealing with a washing machine drain obstruction is one of those tasks that can either be a simple, no-sweat DIY fix, or lead to mountains of stacked aggravation if tried alone. Similar to daily drain obstructions in kitchen and bathroom fixtures, much of your potential success comes down to how well you understand your washing machine drains, and the tools and methods you make use of to clear blocked particles.

Without the ideal devices, you can end up making matters even worse by irreversibly harmful impacted drains and pipes, causing extensive (and ultimately avoidable) expert service needs.

Loading Up With the Right Tools

For any major clogged washing machine cleaning or drain tasks, it’s definitely essential to gear up and acquaint yourself with the important devices for the task. In these cases, you must make you have the following on-hand:

Standard screwdrivers and wrenches, for protective plate removal
A big water pail; when you detach washing machine pipelines, you can anticipate recurring water
Pipe cutters (if needed).
Basin wrenches.
Hex-shaped wrenches.
An industrial drain auger, or drain snake.

Worth more than simply having these devices is knowing ways to utilize them. The most common DIY washing machine repair service mistakes occur when homeowners try their hand at taking apart units, and penetrating through drain hoses, recklessly. You can’t simply crack open your drains and anticipate cleaning to be a breeze.

Prior to you do anything to your washing machine drains, make sure you comprehend the best ways to utilize the devices you’re geared up with and various other factors, such as the reason for drain obstructing in the first place.
Figure out the Preliminary Cause.

For any kind of Do It Yourself drain cleaning application, you have actually got to remember the cause of obstructing to discover the best resolution. When it pertains to washing machine drain clogs, specifically, the reasons for an obstruction can typically be attributed to a couple of essential parts; these consist of soap/detergent residue accumulation, grease and oils on clothes and remaining product fragments.

During washing cycles, these little, apparently unimportant products can develop within drain pipelines and hoses, resulting in stubborn obstructions if left ignored. Washing machine obstructions can normally be recognized by consistent pooling within a washing machine device, as water paths will be blocked.

How to Deal with Clogged Washing Machine Drains

How to Deal with Clogged Washing Machine Drains

Ways to Clean Out Clogged Material Debris.

If you’re convinced of a washing machine drain blockage, and have the right devices on-hand to deal with it effectively, there’s a likelihood you can deal with the stopped up drains on your own.

The initial step of DIY washing machine drain cleaning needs finding and detaching the washing machine’s drain hose from the back of the unit, which can generally done with a standard screwdriver. This hose is where all of the water from your washing machine unit goes through, so you can usually anticipate some water spillage right here (keep that container useful).

This drain hose is usually connected to unit drain pipelines via wire or plastic tie, which can be removed through simple cutting. With complete access to your drain pipe, you can start snaking through the pipeline with your drain auger, till you fulfill resistance; this is the very source product of your clog.

When you have found the clogged debris in your washing machine pipe with the auger, simply tighten the wing nut on the auger and turn; this efficiently latches onto the debris, enabling you to pull it from your drain pipelines directly. Gradually and gradually, pull the auger back out towards the entrance, bringing the clogged products with it.

Now, with the persistent obstructing particles eliminated, you can reattach the drain pipe and hose, and connect it to your washing machine device. To fully clean your washing machine system of any residual particles, run an empty wash cycle.

Keep in mind: if you do not have an expert drain auger, you can attempt disintegrating clogged up materials by directly flushing hot water and baking soda/vinegar mixes into the drain pipeline. These mixes react naturally to fragment obstructed debris, and can provide the exact same quality results as a professional snaking system.


If you need a Fort Myers Plumber to assist you with your plumbing projects, please call us today at (239) 260-4446, and we’d be happy to provide you with a free quote.

No Comments

Be the first to start a conversation

Leave a Reply

  • (will not be published)